10-06/2019
Research and Technology Board has been organized at POLEMA JSC
04-06/2019
POLEMA JSC introduced new products at the exhibition “Metalloobrabotka-2019”
POLEMA JSC introduced new products at the exhibition “Metalloobrabotka-2019”
03-06/2011
Progressive materials for multi-functional vacuum coatings
Application fields of materials for multi-functional vacuum coatings, characteristics of sputtering targets and evaporable sources used for technologies of physical deposition of hardening, protective, decorative and light-reflecting coatings, resistive, switching and transparent electro conductive films.
24-05/2011
Molybdenum and tungsten products for production of leucosapphires
POLEMA JSC is the leading global manufacturer of chromium, molybdenum, tungsten products,
Instrumental steels for coatings
Application
Powders of instrumental steels are intended for the preparation of a cutting and shaping instrument using the hot compaction method, for restoring and reinforcing a die instrument by plasma transfer arc (PTS) hardfacing, creating the working surfaces of a cutting instrument, strengthening cold-rolling rollers by plasma transfer arc hardfacing, and other purposes. The powders are produced by spraying molten metal using gas.
| Power grade | Nominal chemical composition, % | |||||||||||
| Main components | Maximum admixtures | |||||||||||
| Fe | C | Cr | W | Mo | V | Co | Si | Mn | Ni | S | O | |
| AP-FeW6Mo5 | base | 1 | 4 | 6,5 | 5 | 2 | - | <0,5 | 0,55 | 0,4 | 0,03 | 0,03 |
| AP-FeW6Mo5-b | base | 1 | 4 | 6,5 | 5 | 2 | - | <0,6 | 0,65 | 2 | 0,03 | n/a |
| AP-FeW0Mo6V1 | base | 0,75 | 4 | - | 6 | 1 | - | <0,4 | 0,55 | 0,4 | 0,03 | 0,03 |
| AP-FeW0Mo6V1Co8 | base | 0,75 | 4 | - | 6 | 1 | 8 | <0,4 | 0,55 | 0,4 | 0,03 | 0,03 |
| AP-FeW0Mo6V3Co8 | base | 1,2 | 4 | - | 6 | 2,5 | 8 | <0,4 | 0,55 | 0,4 | 0,03 | 0,03 |
| AP-FeW0Mo2V3Si | base | 1,2 | 4 | <0,8 | 2,5 | 3 | <0,5 | 0,5 | 0,55 | 0,35 | 0,03 | 0,03 |
| AP-FeCr5W3MoV5Si2 | base | 1,7 | 5,5 | 3 | 0,5 | 5 | - | 2 | 0,8 | 0,4 | 0,03 | 0,03 |
| AP-FeCr6WMoV8Si | base | 2,1 | 6 | 1 | 0,5 | 8 | - | 1 | 1 | 0,4 | 0,03 | 0,03 |
| AP-FeCr3WMoV5Si | base | 1,3 | 3 | 1,5 | 1,5 | 5 | - | 0,8 | 0,5 | 0,4 | 0,03 | 0,03 |
| AP-FeCr12MoV | base | 1,5 | 12 | - | 0,5 | 0,3 | - | - | 0,4 | 0,4 | 0,03 | 0,03 |
| AP-FeCr12MoV3Ti | base | 2,2 | 12 | - | 0,5 | 3 | Ti 0.08 | - | 0,6 | 0,4 | 0,03 | 0,03 |
| AP-FeCr18MoVCo2 | base | 1 | 18 | <0,3 | 1,2 | 0,15 | 1,5 | <1 | 1 | 0,45 | 0,03 | 0,05 |
| AP-FeCr8W2V2Co | base | 0,9 | 4,5 | 2,5 | - | 2 | - | 1,4 | 1 | n/a | n/a | n/a |
AP – Atomized Powder
High Steel Powders
AP-FeW6Mo5, AP-FeMo6V1, AP-FeMo6V1Co8, AP-FeMo6V3Co8, AP-FeMo2V3Si.
AP-FeW6Mo5-b is for bead-blasting treatment, microhardness is ≥400 HV 0.05 /5 (acc. to specification); 750-1000 HV (factual).
Die Steel Powders
AP-FeCr5W3MoV5Si2, AP-FeCr6WMoV8Si, AP-FeCr3WMoV5Si, AP-FeCr12MoV, AP-FeCr12MoV3Ti
AP-FeCr18MoVCo2, AP-FeCr8W2V2Co
The size of the particles (the main fraction) µm
Powders, excluding AP-FeW6Mo5-b for bead-blasting : <40, <63 (20-63), 40-100, 63-200, 80 -160, 100-280, <315, 160-400, <800, etc.
Powder for bead-blasting treatment is AP-FeW6Mo5-b: 40-250, 80-200, 100-315, 140-200, 160-315, 160-400, 315-630
